Impedance load
Impedance load
Most enclosures have a nominal impedance of 8 Ω. The exceptions are:
• 16 Ω:
• K2 (HF section), Kiva II, V-DOSC (HF section), 5XT, X4i
• 4 Ω:
• SB28, KS28, Syva Low, K1-SB
total impedance
number of enclosures/sections in parallel
Nominal 2 3 4 5 6
16 Ω 8 Ω 5.3 Ω 4 Ω 3.2 Ω 2.7 Ω
8 Ω 4 Ω 2.7 Ω — — —
4 Ω enclosures cannot be connected in parallel.
Refer to Enclosure drive capacity per amplied controller (p.91) for the maximum number of enclosures/
sections per output and in total on each amplied controller.
90 Preset Guide owner's manual (EN) version 16.0
To Next Page
Loading...
Need help?
General
