Lainox Heart X User Manual

32
14 • PROGRAMS
90024570rev00
User programs
New program
PROGRAMS
USER PROGRAMS
Programs 004 / 400
Crepes-flan (001)
Roasts 1 - probe
Large cream puffs (001)
Bread 2
PROGRAMS
Press the ÒProgramsÓ key to access the
ÒUser programsÓ / ÒNew programÓ selection
screen.
• Select “User program” by pressing the
display or confirm by pressing the
Scroller+, to retrieve a previously saved
program.
• Select the desired recipe directly on the
touch screen or turn the Scroller+ to the
desired recipe, then press the “Open”
key or confirm by pressing the Scroller+.
14.1 -RETRIEVE A STORED PROGRAM

Lainox Heart X Specifications

General

Brand	Lainox
Model	Heart X
Category	Oven
Language	English

Summary

General Reminders

Points to Remember

Description of Symbols

Core Temperature Symbol

Used for setting the internal food temperature target.

Delta T Symbol

Represents temperature difference between core and chamber.

Switching the Oven On

Saving HACCP Log

Preheating the Oven

Cooking with Core Probe

Positioning the Core Probe

Instructions on correctly inserting the probe into food.

Applications and Advantages of Core Probe Cooking

Benefits and uses of core probe cooking for better results.

Setting Cooking with Core Probe

Steps to configure cooking parameters using the core probe.

Interactive Cooking

Personalization of Parameters

How to adjust cooking settings for individual needs.

Personalization of Cooking Cycles

Customizing individual cooking steps within a program.

Management ICS/Extra Programs

Extra Functions

Regeneration

Used for quickly reheating previously cooked food.

Holding

Keeps food hot and ready to serve after cooking.

Thawing

Multilevel Cooking

Multilevel Timed/Core Probe Cooking

Multilevel "JIT" Just in Time Cooking

Manual Cooking

Selecting Cooking

Choosing the cooking mode (convection, steam, combi).

Adding Cooking Cycles

Saving Recipes

Programs

Retrieve a Stored Program

Adding Programs to Favourites

Eliminating User Programs

Creating a New Program

Change a Stored Program

Saving Changes to a Stored Program

PLUS - Special Functions

Cooking Timer

Cooking with AT System

Utilizes AT system for precise temperature difference control.

Advice, Applications and Advantages of AT System

AT Cooking Settings

Vent Management

Fan Management

Holding

Keeps food hot and at the correct temperature after cooking.

Finish

Controls gradual temperature increase for browning effects.

Daily Cleaning

Washing the Oven

Selection of Washing Type

Manual Wash

Washing Kit

Soft Wash

Hard Wash

Oven Management

Service

Access to maintenance and service functions, for authorized technicians.

User Settings

Customizing user-specific parameters and preferences.

User Parameters - Block Functions

Locking/unlocking specific menu functions for user control.

Restoring All the Menu Functions

Unblocking all functions after they have been restricted.

Downloading HACCP Log

Saving HACCP data from the oven to a USB drive.

Recipe Management

Copying and loading user recipes to/from a USB stick.

Change User Password

Self-Diagnosis and Fault Identification

Serious Alarm

Identifies critical faults that halt oven operation.

Non Serious Alarm

Identifies faults that affect specific functions but not the whole oven.

Touch Screen Main Control Panel