53
90024570rev00
16 • PLUS - Special Functions
16.6 - FINISH
Finish is a special function which is
used in combination with the last or only
cooking cycle. It enables a gradual,
controlled increase in oven temperature
in convection mode in order to obtain the
desired AU GRATIN - DRYING effect.
The best FINISHING results are
obtained when the last cooking phase
includes temperature control with the
core probe. The probe establishes the
right time to turn the function on based
on the the level of FINISH desired.
FINISH “OFF”:
No finish
SOFT” FINISH”:
delicate browning;
MEDIUM FINISH:
normal browning;
HARD” FINISH”:
marked browning.
The FINISH is an integral part of the last
cycle of the program. If the last cycle
is time based, the finish function will
automatically turn on before the end
of the cooking cycle in proportion to
the selected degree of FINISH; if the
cycle includes operation with the core
probe, the higher the degree of finish,
the earlier the function will be turned on.
During the FINISH function, no cooking
parameters can be changed.
The end of cooking signal tells you the
food has been cooked to the desired
degree of FINISH.
SETTING FINISH
Manual
03/
03
Before loading
AST DR
AST DR
AST DR
CYCLES
30
%
5'
130
Special Functions
Total cooking time
Delta T cooking
Vent management
Fan management
Hold
Finishing
•
Press “PLUS” directly on the touch screen
to access the Special Functions.
•
Select “Finishing” directly on the touch
screen or turn the Scroller+ to “Finishing”
and confirm by pressing the Scroller+.
To Next Page
Loading...
Need help?
General