EasyManuals Logo
Home>Lamtec>Controller>FMS 4

Lamtec FMS 4 User Manual

Lamtec FMS 4
162 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
6
General Information For your safety
Follow the legislation The legislation on safety of appliances states:
on safety of appliances Follow the instructions !
Proceed only in accordance with this FMS commissioning supplement
(booklet No. D LT 6079)
Use the appliance solely for the specified purpose.
It must be operated only by trained personnel. The appliance must be
operated and serviced only by persons with the required knowledge and
training. Follow the burner manufacturer's safety rules.
Associated automatic flame guard
The unit is approved for use only with an external automatic flame guard.
The automatic flame guard type F 250 made by Hartmann & Braun is used
for testing purposes.
However, any other automatic flame guard tested in accordance with
DIN EN 298 and/or DIN EN 230 and approved for continuous operation may
be used instead of this.
Electrical connection to appliances not mentioned in these instructions
Only after consultation with the manufacturers or a qualified expert.
If an automatic flame guard not approved for continuous operation is
connected, approval of the system for continuous operation will lapse.
Liability for proper functioning of the appliance passes to the owner
or operator.
Liability for correct functioning of the appliances in every case passes to the
owner or operator, should the appliance be incorrectly operated, serviced or
repaired by persons without the requisite knowledge, or if operation is
inconsistent with the specified intended purpose.
In the event of modifications to the unit the type approval lapses. The unit's
inputs and outputs and associated modules must only be wired according
to the specifications in these instructions.
LAMTEC GmbH & Co KG will not be liable for damage or injury arising out of
a failure to observe the instructions above. The warranty and liability provisions
of the terms and conditions of sale and supply of LAMTEC GmbH & Co KG
shall not be extended by virtue of the instructions above.
Where reference is made to legislation, government regulations and
standards, these are based on the legal system of the Republic of Germany.
To be used only in a grounded power line network!

Table of Contents

Other manuals for Lamtec FMS 4

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Lamtec FMS 4 and is the answer not in the manual?

Lamtec FMS 4 Specifications

General IconGeneral
BrandLamtec
ModelFMS 4
CategoryController
LanguageEnglish

Related product manuals