Services
E220 Series Cellular Router User Guide 168
C. Client to Gateway
a. General Settings
Parameters Description
Profile Name Enter the Profile Name to identify the Client–to-Gateway IPSec VPN
connection.
Enable Check to enable the connection.
Remote IPSec Gateway Enter the IP Address or domain name of the Remote IPSec Gateway
server.
Remote ID Enter the Domain Name of the remote network for use on the VPN
connection.
Interface Select the interface to configure IPSec:
• WAN
• WWAN
• 3G
• Auto
Selecting a particular interface will bind the IPSec tunnel
to that particular interaface. Selecting Auto means that
the IPSec tunnel will be created over an active interface
as defined in Load Balancer policies.
Local Address Enter the IP Address and subnet mask of local network for use on
the VPN connection.
To Next Page
Loading...
Need help?
General