To Next Page

To Previous Page

Operation

Basic operation

1. First, connect power cord correctly. At this moment, the TV switches to standby mode.

Press the ON/OFF, INPUT, CH

button on the TV or press the POWER, TV, INPUT, CH

, Number

(0 ~ 9) button on the remote control and then the TV will turn on.

2. Select the viewing source by using INPUT button on the remote control.

This TV is programmed to remember which power state it was last set to, even if the power cord is out.

3. When finished using the TV, press the POWER button on the remote control. The TV reverts to standby mode.

1. Press the VOL

button to adjust the volume.

2. If you want to switch the sound off, press the MUTE button.

3. You can cancel this function by pressing the MUTE or VOL

button.

Press the

or NUMBER buttons to select a channel number.

- The menus can be shown on the

screen in the selected language.

First select your language.

Menu Language Selection

Volume Adjustment

Turning on the TV

Channel Selection

Press the MENU button and then use

button to select the SPECIAL

menu.

Press the

button and then use

button to select Language.

Press the

button and then use

button to select your desired

language. From this point on, the on-screen menus will be shown in the

selected language of your choice.

Press the EXIT button to save and return to TV viewing.

• If you intend to be away on vacation, disconnect the power plug from the wall power outlet.

LG 26LX2R User Manual

Questions and Answers: