106
TIME SETTING
TIME SETTING
AUTO ON/OFF TIME SETTING
The Off time function automatically switches the TV to standby at a preset time.
The Off time function overrides the On time function if both are set to the same time.
The TV must be in standby mode for the On time to work.
• To cancel On/Off Time function, select Off.
• For On Time function only
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
1
Select TIME.
2
Select Off Time or On Time.
3
Select Repeat.
4
Select Off, Once, Daily, Mon. ~ Fri.,
Mon. ~ Sat., Sat. ~ Sun. or Sun..
5
Set the hour.
6
Set the minutes.
1
Select Input.
2
Select the input source.
3
Set the programme.
4
Adjust volume level at switch-on.
OK
Move
● Clock
● Off Time : Off
● On Time : Off
● Sleep Timer : Off
● Alarm : Off
● Automatic Standby : 4 hours
TIME
● On Time : Off
OK
Move
● Clock
● Off Time : Off
● On Time : Off
● Sleep Timer : Off
● Alarm
● Automatic Standby : 4 hours : Off
TIME
● On Time : Off
Repeat
◄
Off
►
Hour
00
Minute
00
Input
Antenna
Programme
TV1
Volume
30
Close
1 Mar. 2007 16:09
►
►
SLEEP TIMER SETTING
You do not have to remember to switch the TV off before you go to sleep.
The sleep timer automatically switches the TV to standby after the preset time has elapsed.
• When you switch the TV off, the preset
sleep timer is cancelled.
• You can also adjust Sleep Timer in the
TIME menu.
1
Select Sleep Timer.
2
Select Off, 10, 20, 30, 60,
90, 120, 180 or 240 min.
■ Image shown may differ from your TV.
To Next Page
Loading...
Need help?
General
