6
EXTERNAL EQUIPMENT SETUP
EXTERNAL EQUIPMENT SETUP
1
2
USB SETUP
1
Connect the USB device to the USB IN jack
on the TV.
2
After connecting the USB IN jack, you use the
USB function. (
►
p.44)
CONNECTING WITH A RF CABLE
To avoid picture noise (interference), allow adequate distance between the VCR and TV.
1
Connect the ANT OUT socket of the VCR to
the ANTENNA IN socket on the TV.
2
Connect the antenna cable to the ANT IN
socket of the VCR.
3
Press the PLAY button on the VCR and match
the appropriate channel between the TV and
VCR for viewing.
Wall Jack
Antenna
1
or
To Next Page
Loading...
Need help?
General
