13
CONNECTION
AND SETTING
Controlling
Controlling
Y
Y
our TV with the
our TV with the
Supplied Multi-brand Remote
Supplied Multi-brand Remote
Control
Control
You can control the sound level, input source, and
power switch of your LG TV with the supplied
Multi-brand Remote Control.
You can control your TV using the buttons below.
By pressing You can
POWER Turn the TV on or off.
INPUT Switch the TV’s input source
between the TV and other input
sources.
CH +/– Scans up or down through
memorized channels.
VOL +/– Adjust the volume of the TV.
Depending on the unit being connected, you may not be able
to control your TV using some of the buttons.
Controlling other TVs with the
Multi-brand Remote Control
You can control the sound level, input source, and
power switch of non-LG TVs as well. If your TV is listed
in the table below, set the appropriate manufacturer
code.
1. While holding down TV POWER (
11
) button, press
the number buttons to select the manufacturer code
for your TV (Refer to table on the right column).
2. Release TV POWER (
11
) button.
Code numbers of controllable TVs
If more than one code number is listed, try entering
them one at a time until you find the one that works
with your TV.
Manufacturer Code Number
LG / GoldStar 1 (Default), 2
Zenith 1, 3, 4
Samsung 6, 7
Sony 8, 9
Hitachi 4
Depending on your TV, some or all buttons may not
function on the TV, even after entering the correct man-
ufacturer code.
If you enter a new code number, the code number previous-
ly entered will be erased.
When you replace the batteries of the remote, the code
number you have set may be reset to the default setting.
Set the appropriate code number again.
Notes
Notes
Note
Note
To Next Page
Loading...
Need help?
General
