47
VCR
RECORDING
Recording from External
Recording from External
Components
Components
You can record from an external component, such as a
camcorder or VCR, connected to any of the Recorder’s
external inputs.
1. Make sure that the component you want to record
from is connected properly to the Recorder. See
page 15.
2. Press INPUT repeatedly to select the external input
to record from.
AV1: Audio/Video Input mounted on back panel.
AV2: Audio/Video Input mounted on front panel.
DV: DV Input mounted on front panel.
3. Load a recordable tape.
4. Set a recording mode as necessary by pressing
REC MODE repeatedly.
VCR: SP or SLP
5. Press z REC once to start recording.
The REC indicator lights in the display window.
6. Press STOP (x) to stop recording.
Check that the Audio In settings DV Record Audio
are as you want them. See page 56.
If your source is copy-protected using CopyGuard,
you will not be able to record it using this recorder.
See Copyright on page 3 for more details.
Recording continues until you press STOP (x) or the
disc is full.
To record for a fixed length of time, see [Instant
Timer Recording] on page 44.
When unit is on any external inputs mode (AV1, AV2
and DV) the CH +/- buttons don’t work, press INPUT
(on remote) repeatedly to select the TV mode, and
then select the TV channels.
Notes
Notes
To Next Page
Loading...
Need help?
General
