5. Software Control – Lightware Device Controller DVIDL-OPT series – User's Manual 21
Terminal Window
This general purpose terminal is intended mainly for testing and
with a router this terminal can be used either via the USB connection. All
commands can be used here that are discussed in the Programmer's
Reference chapter. The command text can be typed directly.
By default commands are automatically surrounded by framing
brackets. Every sent command and every received response gets an
distinguish.
The timecode in every row shows the exact time when the command
was sent or the response received.
If the Command framing checkbox is unchecked, you can send multiple
commands together, however in this case you have to type in the
framing brackets manually.
The terminal can be also opened after starting the LDC - press the
Terminal button on the Device discovery page on the bottom of the
window.
TIPS AND TRICKS: The typed commands can be 'browsed' when
the cursor is in the command line and you press the up button on
the keyboard. The commands are stored until the LDC is closed.
The Terminal Window
To Next Page
Loading...
Need help?
General