Lightware HDMI-3D-OPT-TX210A User Manual

HDCP compliant
HDMI-3D-OPT-TX200 series fulll HDCP standard. HDCP capability on the digital video
inputs can be disabled when non-protected content is extended.
Advanced EDID management
User can emulate any EDID on the input ports, read out and store any monitor's EDID in
the internal memory.
Pixel Accurate Reclocking (removes jitter caused by long cables)
The output has a clean, jitter free signal, eliminating signal instability and distortion caused
by long cables or connector reections.
Frame detector and signal analysis
Using Lightware Device Controller software the exact video and audio signal format can be
determined such as timing, frequencies, scan mode, HDCP encryption, color range, color
space and audio sample rate.
Deep Color support and conversion
It is possible to transmit the highest quality 36-bit video streams for perfect color reproduction.
DVI/HDMI, DP/HDMI conversion
The transmitter is able to convert the input video signal to another format so that you can
watch the video on your local display in another format.
Bi-directional RS-232 pass-through
AV systems can also contain serial port controllers and controlled devices. Serial port pass-
through supports any unit that works with standard RS-232.
Locking DC connector
Special plug of wall adaptor ensures safe power supply. This type of connector prevents
unwanted extractions.
Separate Audio and Video switching
Video and audio signals are separated and can be switched independently.
Analog Audio conversion
Analog audio signal is converted to digital before being sent to the output
Input (video & audio) status LEDs
Front panel LEDs give feedback about the state of the unit and the video and audio signals.
Accepts analog and digital audio signals
Accepts analog stereo; and 7.1 HDMI embedded audio signals. Analog signals are
converted to digital format and the digital or digitized analog audio can be embedded in the
video stream.
Auto-switch function for video and audio inputs
Autoselect mode with or without priority can toggle between inputs. It helps the handling
of the transmitter and installation of new devices (only in case of SW4-OPT-TX240RAK
model).
HDMI-3D-OPT-TX200 series
User’s manual
Introduction Page 9 / 106

Lightware HDMI-3D-OPT-TX210A Specifications

General

Brand	Lightware
Model	HDMI-3D-OPT-TX210A
Category	Extender
Language	English