UCX series – User's Manual 56
System
System tab in Settings menu
The following functions are available under System tab:
▪ Support package
▪ Load factory defaults - recalling factory defaults settings and values. All factory default settings are
listed in the Factory Default Settings section.
▪ Reboot - rebooting the system.
▪ Set time - (internal clock) of the switcher which is used for logging events.
▪ Pressing Sync with Computer button is a quick and easy way to set the time. #factory #log
#systemlog #reboot #restart
Script management
DIFFERENCE:
Put a tick to enable the Run script. It means, that the script runs until the uploading another script or disable
this function.
Click Upload File
#new
DIFFERENCE:
and upload to another device.
ATTENTION!
version is installed on the devices.
Click on the Download Clone File button to save the setting to the computer.
Step 1.
required: IP Address, Subnet Mask, Gateway Address)
Step 2. Click on the Select le
Step 3. The clone process will start by clicking on Restore button.
To Next Page
Loading...
Need help?
General
