UCX series – User's Manual 73
Set the USB Autoselect Policy
DIFFERENCE:
Command and Response #new
ç SET·<op_mode>
æ pw·<op_mode>
Parameters
Parameter Parameter description
<op_mode> Operation mode
Off
The autoselect function is disabled.
Last Detect
Always the last attached input is switched to
the output automatically.
First Detect
Follow video
Follows the video crosspoint state
automatically.
Example
ç
æ
Set the Followed Video Port to Autoselect
Command and Response
ç SET·/V1/MEDIA/USB/AUTOSELECT/H1.VideoFollowPort=<out>
æ pw·/V1/MEDIA/USB/AUTOSELECT/H1.VideoFollowPort=<out>
Example
ç
æ
Change the Autoselect Included USB Ports
DIFFERENCE:
Command and Response
ç SET·/<host>.Included=<state>
æ pw·/<host>.Included=<state>
Parameters
Parameter Parameter description
<host> USB Host
U1-U4
USB-C and USB-B port number
<state>
The chosen input is ignored from the
autoselect process or not.
true
The port is included in autoselect.
false
The autoselect function ignores that port.
Example
ç
æ
Change the USB Port Priority
DIFFERENCE:
Command and Response
ç SET·/<host>.Priority=<prio_num>
æ pw·/<host>.Priority=<prio_num>
Parameters
Parameter Parameter description
<host> USB Host
U1-U4
USB-C and USB-B port number
<prio_num>
Priority number from 1 to 100, equal
numbers are allowed.
1-100
1: the highest priority
100: the lowest priority
Example
ç
æ
To Next Page
Loading...
Need help?
General
