UCX series – User's Manual 68
Welcome Screen Settings
Display Welcome Screen Image
Command and Response #welcomescreen
ç SET·/V1/MEDIA/VIDEO/I5/WELCOMESCREEN.ImageEnabled=<image_state>
æ pw·/V1/MEDIA/VIDEO/I5/WELCOMESCREEN.ImageEnabled=<image_state
Parameters
Parameter Parameter description
<image_state>
true
false
The welcome screen image is displayed.
The welcome screen image is not displayed.
Example
ç
æ
Display Welcome Screen Text
Command and Response
ç SET·/V1/MEDIA/VIDEO/I5/WELCOMESCREEN.MessageEnabled=<text_state>
æ pw·/V1/MEDIA/VIDEO/I5/WELCOMESCREEN.MessageEnabled=<text_state
Parameters
Parameter Parameter description
<text_state>
true
false
The welcome screen text is displayed.
The welcome screen text is not displayed.
Example
ç
æ
Set Welcome Screen Text
Command and Response
ç SET·/V1/MEDIA/VIDEO/I5/WELCOMESCREEN.MessageText=<text>
æ pw·/V1/MEDIA/VIDEO/I5/WELCOMESCREEN.MessageText=<text>
Parameters
The <text> may consist of letters (A-Z) and (a-z), hyphen (-), underscore (_), numbers (0-9), space ( ) and dot
Example
ç
æ
Reset Welcome Screen Image
This command restores the original welcome screen image.
Command and Response
ç ·
æ
Example
ç
æ
Video Port Settings - USB-C Related Commands
Restart Link Training
This method is equal with pulling out and plug in again the USB-C connector.
Command and Response #linktraining
ç <in>
æ <in>
Example
ç
æ
Audio Port Settings
Switch Audio Input
Command and Response
ç <audio_in>:O3)
æ mO·
Parameters
Parameter Parameter description
<audio_in> Audio input port
I1-I4
Audio input port number
Example
ç
æ
INFO:
output.
ATTENTION!
the video crosspoint has a limitation: I1 and I5 ports are not available at the same time, only one of them can
be selected to any output. For more details about it see the port diagram in Audio Interface section.
To Next Page
Loading...
Need help?
General
