8. Firmware Upgrade UCX series – User's Manual 87
The Upgrading Steps
ATTENTION!
upgrade. If any problem occurs, reboot the unit and restart the process.
Step 1. Select the Firmware Package.
Click on the Select Firmware Package button and navigate to the
name of package, the preview of the release notes are displayed in the right panel.
version of the device is highlighted in orange if it is different from the version of the package loaded.
DIFFERENCE:
SELECT FIRMWARE PACKAGE
INFO:
The Meaning of the Symbols
Step 2. Select the desired devices for upgrading.
Select the devices for upgrading; the selected line will be highlighted in green.
Click on the Start Update button to start the procedure. The status is shown in
percent in the right side of the device line and the overall process in the bottom
progress bar.
Show
details
The log about the upgrading process of the device
can be displayed in a new window.
Service
mode
The device is in bootload mode. Backup and restore
cannot be performed in this case.
START UPDATE
To Next Page
Loading...
Need help?
General
