Lippert Components Ground Control 2.0 User Manual

TABLE OF CONTENTS
GROUND CONTROL
®
2.0 11
System and Safety Information 11
Prior to Operation 11
Basic Jack Operation 12
Dropping O Unit 12
Taking Up Strut Pin Slop (If JT Strong Arm Stabilizers Are Installed ONLY) 13
Reconnecting the Unit to A Tow Vehicle 13
Truck Hauler Operation (Manual ONLY) 13
Troubleshooting 14
Special Jack Error Codes 14
Zero Point Calibration 14
Touch Pad Error Codes 15
Preventative Maintenance Procedures 15
GROUND CONTROL
®
3.0 (5TH WHEEL) 4 POINT TO 6 POINT 16
System and Safety Information 16
Prior to Operation 16
Touch Pad Diagram 17
Operation 18
Basic Jack Operation 18
Unhitching From A Tow Vehicle 18
Auto Level 19
Auto Level Sequence 19
Hitch Recognition 20
Troubleshooting 20
Manual Override 20
Touch Pad Error Codes 22
Special Jack Error Codes 23
System Settings 23
Zero Point Calibration 23
Preventive Maintenance 24
GROUND CONTROL
®
3.0 ONECONTROL™ TOUCH PANEL 25
System Information 25
Touch Pad Diagram - Auto Leveling Control Touch Pad 25
Safety Information 26
Operation - Auto Leveling Control Touch Pad 26
Unhitching Instructions 26
Auto Level 26
Auto Level Sequence 26
Hitch Recognition 26
Master Owner's Manual
The Master Owner's Manual is intended to provide information on Lippert Components Inc.'s most widely-
used products. Products described in the Master Owner's Manual may not be on every trailer. The trailer may
also have products not included in this manual. All manual information is subject to change without notice.
Revised editions will be available for free download at lci1.com/support. Manual information is considered
factual until made obsolete by a revised version. Manual information may be distributed as a complete
document only, unless Lippert Components provides explicit consent to distribute individual parts.

Lippert Components Ground Control 2.0 Specifications

General

Brand	Lippert Components
Model	Ground Control 2.0
Category	Lifting Systems
Language	English