Lippert Components Ground Control 2.0 User Manual

Rev:11.08.19 Page 56 CCD-0001573-08
Callout Description
A
Jack Buttons - Select Front, Rear, Right and Left jacks to be operated depending on mode.
Jacks available to be operated will be highlighted in blue.
In Standard Mode (Fig. 4), only the Power Tongue Jack can be operated and rear jacks can only
be retracted.
In Manual Mode (Fig. 6), only front and rear jacks are available to be operated (no Power
Tongue Jack operation available).
B UP and DOWN Arrows - Scrolls through options on screen.
C Info - Displays system information, e.g. angle, jack stroke or software version.
D Connected Icon - Press 6 times to program zero point/wireless configurations.
E HOME Icon - Returns screen to home page.
F
Auto Retract - Enters Auto Retract mode to retract all jacks. Power Tongue Jack does not
retract.
G Manual Mode - Enters Manual Mode to manually operate jacks.
H Enter - Push to select various modes.
I RETRACT - Retracts jacks in several modes. Jacks available will be highlighted in blue.
J EXTEND - Extends jacks in several modes. Jacks available will be highlighted in blue.
K RESET - Resets to factory default.
L Power Button - Turns touch panel on and off.
M AUTO LEVEL- Starts the Auto Level sequence.
N AUTO HITCH - Returns trailer to previous hitch height for reconnecting to tow vehicle.
F
G
I J MK N
H
C
Jack Buttons
in Manual Mode
(See Fig. 6)
D
E
L
A
B
Touch Panel Diagram - OneControl Touch Panel
Fig. 4 - Leveling Standard Mode

Lippert Components Ground Control 2.0 Specifications

General

Brand	Lippert Components
Model	Ground Control 2.0
Category	Lifting Systems
Language	English