EasyManuals Logo
Home>Lippert Components>Lifting Systems>Ground Control 2.0

Lippert Components Ground Control 2.0 User Manual

Lippert Components Ground Control 2.0
166 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #79 background imageLoading...
Page #79 background image
Rev:11.08.19 Page 79 CCD-0001573-08
Fig. 2
Prior to Operation
The leveling system shall only be operated under the following conditions:
1. The unit is parked on a reasonably level surface.
2. Be sure all persons, pets and property are clear of the unit while LCI Level-Up Automatic System is in
operation.
3. Ensure the battery of the unit is fully charged or that the unit is plugged into shore power prior to
attempting to operate the system. Level-Up requires a minimum of 12 VDC from the battery for proper
operation.
Operation
Basic Jack Operation
1. Landing gear Jacks
A. Landing gear jacks can be operated any time the system is “ON” but NOT in the “AUTO MODE.”
By pushing the “FRONT” button (Fig. 1G), both front or landing gear jacks can be extended. If the
touch pad is put in the “RETRACT” mode, indicated by the orange illuminated LED next to the
“RETRACT” button (Fig. 1D), the front jacks can be retracted together by pushing the “FRONT”
button.
2. Level-Up jacks
A. The Level-Up jacks operate when the “AUTO MODE” is activated or the touch pad is in the
“MANUAL MODE.” Once system is in “MANUAL MODE,” pressing the “REAR” button (Fig. 1J) will
extend all Level-Up jacks at the same time. Press the “LEFT” or “RIGHT” buttons (Fig. 1H and 1I) to
operate Level-Up jacks on the left or right side of the unit, respectively.
5th Wheel Operation
Unhitching Instructions
1. Push touch panel “ON/OFF,” (Fig. 1K) to turn system on. LCD Screen (Fig. 1E) lights up.
2. LCD will display status … “NOT LEVEL JACKS: UP" (Fig. 2A).
NOTE: Orange arrow lights (Fig. 2B) may come on, indicating the current disposition of the unit.
3. Push "FRONT" button (Fig. 1G) to extend landing gear jacks and lift front of unit to take the weight of
the 5th wheel off of the hitch.
4. Uncouple the 5th wheel connection on the tow vehicle.
5. Pull tow vehicle away and park at a safe distance.
A
B

Table of Contents

Other manuals for Lippert Components Ground Control 2.0

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Lippert Components Ground Control 2.0 and is the answer not in the manual?

Lippert Components Ground Control 2.0 Specifications

General IconGeneral
BrandLippert Components
ModelGround Control 2.0
CategoryLifting Systems
LanguageEnglish

Related product manuals