Lippert Components Ground Control 2.0 User Manual

Rev: 11.08.19 Page 77 CCD-0001573-08
System and Safety Information
• Be sure to park the unit on solid, level ground.
• Ensure all jack landing locations are cleared of debris and obstructions and also free of depressions.
• When parking the unit on extremely soft surfaces, utilize load distribution pads under each jack.
• People and pets should be clear of unit while operating leveling system.
• Be sure to keep hands and other body parts clear of fluid leaks. Oil leaks in the Lippert Leveling System
may be under high pressure and can cause serious skin-penetrating injuries.
Lippert Components Inc. recommends that a trained professional be employed to change the tires on the
unit. Ensure that the unit is properly supported with jack stands, or other adequate devices, under the
frame of the unit prior to commencing any service or repair procedure. Any attempts to change the tires or
perform other service while unit is supported solely by the LCI Level-Up® with Automatic Leveling System
could result in death, serious injury, unit or property damage.
LEVEL UP
®
Introduction
Level Up® is an Automatic Leveling system. This system is equipped with 14K aluminum landing gear and 8K
aluminum leveling jacks. The jacks in the Level Up® system work in pairs.
LEVELING AND STABILIZATION

Lippert Components Ground Control 2.0 Specifications

General

Brand	Lippert Components
Model	Ground Control 2.0
Category	Lifting Systems
Language	English