2 -10
2-2. Safety device
(2) Fender
ļ¬ Fender is a protection device to prevent an
unintended access to the rear tires and to
prevent mud from irrupting to the driver.
ļ¬ Do not remove and modify the fender.
(1) Hood (Bonnet)
ļ¬ Hood is a protection device to prevent an
unintended access to the rotating parts around
engine; cooling fan, fan belt and rotating shaft
and pulley.
ļ¬ Do not remove and modify the hood.
Warning
ā¶If you contact the rotating shaft, it may cause a severe injury.
- DO NOT try to touch the rotating shafts.
- DO NOT remove the protection covers.
- Avoid loose clothes that can easily be rolled up in the rotating shaft.
(3) PTO safety cover and protection cap
ļ¬ PTO safety cover is a protection device to
prevent an unintended access to the PTO shaft
and to prevent an accident causing by the
rotating drive shaft.
ļ¬ Do not remove the PTO safety cover. If the PTO
safety cover or protection cap is damaged or
removed, replace it with a genuine part.
ļ¬ Do not step on the PTO safety cover.
ļ¬ After using the PTO shaft, apply grease and
insert the PTO shaft protection cap.
Fender
Hood (Bonnet)
PTO shaft
protection cap
PTO safety cover