Mahindra ML 120 4035 User Manual

52
8. MOUNTING THE LOADER
CAUTION: Do not stand, walk, or work under a raised loader or attachment unless it is securely
blocked or held in position. Accidental movement of valve handle/handles or leaks in the
hydraulic system could cause the loader to drop, or attachment to dump, causing severe injury.
CAUTION: Do not allow bystanders in loader work area.
IMPORTANT: Never allow weight of tractor to be placed on parking stand when mounting or dismounting
loader.
8.1.1. To aid in mounting and dismounting loader,
apply a small amount of grease, if needed, to each
tower in areas of tower bottom receiver (A), tower top
receiver (B), and inside handle pin hole (C).
Tower
8.1.2. Slowly drive tractor forward to a position where
the hoses can be connected to the loader quick
couplers.
8.1.3. Stop the engine. Connect the loader hydraulic
hoses to the correct quick couplers by matching
colored nylon ties.
8.1.4. Remove handle pins and snap pins from
bearing boxes.
A
C
B
35 Series 4WD, Model - 3535 & 4035 Loader June’08

Mahindra ML 120 4035 Specifications

General

Brand	Mahindra
Model	ML 120 4035
Category	Front End Loaders
Language	English