Mahindra ML 120 4035 User Manual

58
10.3. SKID STEER TOOL CARRIER SYSTEM SERVICE & LUBRICATION
IMPORTANT: To maintain your Skid Steer Tool Carrier System
functioning properly, always keep handle components and
latching areas clean.
Keep these areas clean
Keep these areas clean on your attachment
10.3.1. Inspect latching components and pins. If damaged, only
replace with Factory approved components.
Check and tighten this 1/2" bolt
after every 20 hours of operation,
1 place each side
Lubricate these 2 grease fittings,
2 places each side,
every 2 months of operation.
IMPORTANT: To maintain your Skid Steer Tool Carrier System functioning properly, always inspect Skid
Steer Tool Carrier System components for damage or wear. If damage or wear exists, replace
components immediately.
35 Series 4WD, Model - 3535 & 4035 Loader June’08

Mahindra ML 120 4035 Specifications

General

Brand	Mahindra
Model	ML 120 4035
Category	Front End Loaders
Language	English