68
16. SKID STEER PALLET FORK
CAUTION: To improve tractor and loader stability and to prevent overloading tractor front axle
never handle any material with the following attachments that exceed weight specifications noted.
IMPORTANT: Read safety information in this section and on decals before operating attachments.
ROPS (Roll-Over Protective Structures) and
seat belt equipped tractors are recommended
for operator use in all pallet fork operations.
Do not lift or carry anyone on buckets, forks,
probes, or any other portion of the loader or
loader attachments.
Do not allow riders on tractor, loader, or forks.
Avoid contact with electrical power lines by
loader or attachments.
To avoid serious injury or death:
Do not use pallet fork attachment to lift
large objects, round bales, or items that
may roll or slide down loader arms onto
the operator.
Always keep pallet forks level when raising
loads.
Avoid raising loads to full heights with pallet
forks rolled back.
Always transport loads with pallet forks
low and level to ground.
0595-3105
WARNING: The pallet fork attachment is specifically designed to engage and load palleted
materials. Do not use forks to handle large loads such as bales, posts, etc. as they can fall or roll
back onto operator causing serious injury or death.
Pallet Fork Attachment -- Skid Steer type --- Maximum load on forks is 1200# (24” forward of front side of
attachment frame)
35 Series 4WD, Model - 3535 & 4035 Loader June’08
To Next Page
Loading...
Need help?
General
