65
14. SKID STEER BUCKET
IMPORTANT: Read safety information in this section and on decals before operating attachments.
WARNING: To avoid serious injury or death from large round or square hay bale handling:
• Use only Factory bale spear or bale retaining device handler attachment when handling round
bales.
• Do not handle large square bales without a retaining device handler attachment
• Do not use buckets, forks, or other attachments without bale retaining devices.
• Do not use loader for handling large, heavy objects such as logs, tanks, etc.
WARNING: To avoid serious injury or death, realize handling large heavy objects can be extremely
dangerous due to:
• Danger of rolling the tractor over.
• Danger of upending the tractor.
• Danger of the object rolling or sliding down the loader arms onto the operator.
WARNING: To avoid serious injury or death:
• Do not lift or carry anyone on buckets, forks, probes, or any other portion of the loader or
loader attachments.
• Avoid contact with electrical power lines by loader or attachment
WARNING: Inadvertent movement of the loader or attachment could result in serious injury or
death.
14.2. INSTALLATION INSTRUCTIONS TO SKID STEER TOOL CARRIER
IMPORTANT: Refer to Pages 61 to 63 for instructions concerning Installing Attachment to Skid Steer Tool
Carrier.
IMPORTANT: Refer to Page 64 for instructions concerning Removing Attachment from Skid Steer Tool
Carrier.
14.1. SKID STEER BUCKET
NOTE: Factory skid steer bucket comes in 72”
width only. Never use a bucket wider than 72”
and with a higher struck capacity than 12.5 cu.
ft. on ML120 Mahindra loader. Failure to follow
these instructions will cause tractor over-load
and void warranty.
35 Series 4WD, Model - 3535 & 4035 Loader June’08
To Next Page
Loading...
Need help?
General
