Manitowoc GROVE GMK 5095 User Manual

Boom extension
4.2 Description of the rigging work
Lattice extension operating instructions 3 112 441 en 4 - 17
GMK 4100/4100-L/5095
11.01.2008
Connection to
the swing-away
lattice
Establishing the connection
• Unwind the cable (2) from the holder (1) in
section 3.
• Lay the cable (2) as far forward as possible
to section 1.
• Pull the protective cap off the socket (3).
• Unwind the cable (5) from the holder (7).
• Remove the plug (4) from the dummy socket
(6) and plug it into the socket (3).
• Wind up the cable (5) on the holder (7) until
it does not sag.
• Wind up the cable (2) on the holder (1) until
it does not sag.
Undoing the connection
• Remove the plug (4) from the socket (3) and
plug it into the dummy socket (6).
• Wind the cable (5) onto the holder (7).
• Cover the socket (3) with the protective cap.
• Lay the cable (2) to the rear through
section 4 and section 3.
• Wind up the cable (2) on the holder (1) in
section 3.

Manitowoc GROVE GMK 5095 Specifications

General

Brand	Manitowoc
Model	GROVE GMK 5095
Category	Construction Equipment
Language	English