Information
1.1 About these operating instructions
Lattice extension operating instructions 3 112 441 en 1 - 1
GMK 4100/4100-L/5095
11.01.2008
1 Information
1.1 About these operating instructions
Validity of these
operating instruc-
tions
These Operating instructions apply to the lattice extension of which the
serial number is identical to that on the cover sheet. The designation of the
lattice extensions
à Identification, p. 2 - 4.
For the operation of the truck crane with lattice extension, the Operating
instructions supplied with the truck crane also apply.
Prerequisites
for assembly and
operation
These lattice extensions may only be operated on truck cranes with the
same serial number as that of the lattice extensions.
1.2 Basic safety instructions
Safety instruc-
tions
The operation of the GMK 4100/4100-L/5095 with one of the lattice exten-
sions described in these operating instructions is subject to:
– All the safety instructions contained in the operating instructions supplied
with the truck crane and
– All of the following safety instructions
Secure the pins both in the connecting points and in the holders always with
retaining pins to prevent unsecured pins from coming loose, falling down
and causing injuries.
Observe the centre of gravity information for slinging and use suitable
slinging material.
In this way, you can prevent attached sections from slipping out, falling
down and causing injury during the installation or removal.
Warnings and
symbols
H
Information regarding the used warnings and symbols; à Operating
instructions
of the truck crane.
To Next Page
Loading...
Need help?
General
