Auxiliary single-sheave boom top
5.3 Operation with the auxiliary single-sheave boom top
Lattice extension operating instructions 3 112 441 en 5 - 11
GMK 4100/4100-L/5095
11.01.2008
5.3.5 LMB display with folded / rigged auxiliary single-sheave
boom top
If the auxiliary single-sheave boom top is installed on the main boom in
working position or transport position, the lifting capacities specified in the
Lifting capacity tables are reduced.
The
Maximum load display (1) does not show the reduced values.
The SLI takes into account the value for the installed auxiliary single-sheave
boom top, adds the weight of the raised load and displays the sum on the
Current load display (2). The SLI is switched off earlier accordingly.
5.3.6 Notes on two-hook operation
Notes on two-hook operation; à Turning loads, p. 7 - 1.
To Next Page
Loading...
Need help?
General
