Swing-away lattice
3.2 Short description of the operating elements
3 - 4 3 112 441 en Lattice extension operating instructions
GMK 4100/4100-L/5095
11.01.2008
On the safe load
indicator
The following buttons and displays are active if a lattice extension is electri-
cally connected.
Lattice extension length display and input
Lattice extension angle display and input
An SLI code for the inclinable lattice extension is displayed.
Current lattice extension inclination display
An SLI code for the derricking lattice extension is displayed.
1 Display: Lattice extension length in metres (m) or feet (ft) –
for displayed SLI code
2 Input: In input mode,
press
R once – next length
à p. 3 - 87
1 Display: Angle between lattice extension and main boom in
degrees (°) – for displayed SLI code
2 Input: In input mode,
press
T once – next angle
à p. 3 - 87
1 Display: Angle between the lattice extension and main boom in
degrees (°)
2 Display: Additional function:
Press
T once – display of current angle between lattice
extension and horizontal position, for two seconds
à p. 3 - 87
To Next Page
Loading...
Need help?
General
