100
Controls in detail
Seats
Multicontour seat*
Some models may be equipped with multi-
contour seats. This seat has a movable
seat cushion and inflatable air cushions
built into the seat backrest to provide addi-
tional lumbar and side support.
The seat cushion movement, backrest
cushion height and curvature can be con-
tinuously varied with regulators on the
right side of the seat after turning the
SmartKey in the starter switch to
position 2 or pressing the KEYLESS-GO*
start/stop button twice.
1 Seat cushion depth
2 Backrest bottom
3 Backrest center
4 Side bolster adjustment
Adjusting the multicontour seat in the or-
der listed above is recommended.
왘 Make sure that the ignition is switched
on.
All lamps in the instrument cluster light
up.
The seat cushion movement, backrest
cushion height and curvature can be ad-
justed with regulators 1, 2 and 3.
The side bolsters of the seat backrest can
be adjusted with rocker switch 4:
왘 Press to the left.
Side support will be increased.
왘 Press to the right.
Side support will be decreased.
i
When the engine is turned off, the last
cushion setting is retained in memory,
and the cushion is automatically ad-
justed to this setting when the engine
is restarted.
To Next Page
Loading...
Need help?
General
