321
Practical hints
Replacing bulbs
Front turn signal lamp bulb
왘 Switch off the lights.
왘 Open the hood (컄 page 253).
왘 Twist bulb socket 1 counterclockwise
and pull out.
왘 Push bulb into socket, turn counter-
clockwise and remove.
왘 Insert new bulb in socket, push in and
twist clockwise.
왘 Reinsert bulb socket in lamp and twist
clockwise.
Parking and standing lamp bulb
왘 Switch off the lights.
왘 Open the hood (컄 page 253).
왘 Turn housing cover 2 counterclockwise
and remove.
왘 Pull out the bulb socket with the bulb.
왘 Pull the bulb out of the bulb socket.
왘 Insert a new bulb in the socket.
왘 Reinstall the bulb socket.
왘 Align housing cover and click into
place.
Side marker lamp bulb
왘 Switch off the lights.
왘 Carefully slide lamp towards rear.
왘 Remove front end first.
왘 Twist bulb socket counterclockwise
and pull out.
왘 Pull bulb out of the bulb socket.
왘 Insert new bulb in socket.
왘 Reinstall bulb socket, push in and twist
clockwise.
왘 To reinstall lamp, set rear end in
bumper and let front end snap into
place.