322
Practical hints
Replacing bulbs
Replacing bulbs for rear lamps
Tail lamp assemblies
1 Brake lamp
2 Turn signal lamp
3 Backup lamp
4 Standing and side marker lamp
5 Rear fog lamp (driver’s side)/tail
왘 Switch off the lights.
왘 Open trunk.
왘 Swing the trim panel covering the cor-
responding rear lights to the side.
왘 Squeeze tabs together and remove the
bulb holder with the bulb.
왘 Twist bulb counterclockwise and pull
out of bulb holder.
왘 Insert new bulb into the holder and turn
it clockwise.
왘 Reinstall bulb holder. The tabs must au-
dibly click.
왘 Close trim panel.
왘 Place the housing cover back on so
that its tabs click in place.
License plate lamp
1 Screws
왘 Switch off the lights.
왘 Loosen both screws 1 and remove
lamp.
왘 Replace the tubular lamp and reinstall
lamp.
왘 Retighten the screws.
To Next Page
Loading...
Need help?
General
