142
Controls in detail
Automatic transmission
One-touch gearshifting
Even with an automatic transmission you
can change the gears yourself when the
selector lever is in position D.
Downshifting
왘 Briefly press the selector lever to the
left in the D– direction.
The transmission will shift from the current
gear to the next lower gear. This action si-
multaneously limits the gear range of the
transmission (
컄 page 143).
Upshifting
왘 Briefly press the selector lever to the
right in the D+ direction.
The transmission will shift from the current
gear to the next higher gear as permitted
by the shift program. This action simulta-
neously extends the gear range of the
transmission.
Canceling gear range limit
왘 Press and hold the selector lever in the
D+ direction until D reappears in the
tachometer display field.
The transmission will shift from the current
gear range directly to gear range D.
Shifting into optimal gear range
왘 Press and hold the gear selector lever
in the D– direction.
The transmission will automatically select
the gear range suited for optimal accelera-
tion and deceleration. This will involve
shifting down one or more gears.
Warning! G
On slippery road surfaces, never downshift
in order to obtain braking action. This could
result in drive wheel slip and reduced vehi-
cle control. Your vehicle’s ABS will not pre-
vent this type of loss of control.
i
To avoid overrevving the engine when
the selector lever is moved in the
D– direction, the transmission will not
shift to a lower gear if the engine's
max. speed would be exceeded.
To Next Page
Loading...
Need help?
General
