Standard display
X
Press and hold the % button on the
steering wheel until the Trip menu with
trip meter : and total distance
recorder ; is shown.
Trip computer "From start" or "From
reset"
The values in the From start submenu are
calculated from the start of a journey whilst
the values in the From reset submenu are
calculated from the last time the submenu
was reset.
X
Press = or ; on the steering wheel
to select the Trip menu.
X
Press 9 or : to select From start
or From reset.
Trip computer "After start" (example)
:
Distance
;
Time
=
Average speed
?
Average fuel consumption
The trip computer function From start is
automatically reset when:
R
the ignition has been switched off for more
than 4hours.
R
999 hours have been exceeded.
R
9,999 kilometres have been exceeded
R
9,999 kilometres/miles have been excee-
ded
The From reset message is shown and the
trip computer is automatically reset if the
value exceeds 9999 hours or 99,999 kilome-
tres.
The From reset message is shown and the
trip computer is automatically reset if the
value exceeds 9999 hours or 99,999 kilome-
tres/miles.
Calling up the range
X
Press = or ; on the steering wheel
to select the Trip menu.
X
Press 9 or : to select approximate
range :.
Approximate range : is calculated accord-
ing to current driving style and the amount of
fuel in the tank.Ifthere is only a small amount
of fuel left in the fuel tank, the display shows
a vehicle being refuelled C instead of
range :.
Digital speedometer
X
Press = or ; on the steering wheel
to select the Trip menu.
X
Press 9 or : to select the digital
speedometer.
:
Digital speedometer
On-board computer
233
Controls
BA 197 ECE RE 2010/6a; 1; 2, en-GB
sabbaeu Version: 3.0.3.6
2010-05-07T14:19:43+02:00 - Seite 233
Z