Miele CoffeeSelect CM 7750 User Manual

Cleaning and care
72
Reassembling the central spout
The dispensing unit is easier to
reassemble if the individual parts are
dampened with water beforehand.
 Reassemble the dispensing unit.
Push the dispensing spouts firmly
back onto the dispensing unit.
Make sure that all parts are tightly
connected to one another.
 Push the dispensing unit back into
the central spout and replace the
stainless steel cover.
 TapOK.
Tip: If the coffee machine is switched
off, the central spout components can
be removed and cleaned at any time.
Cleaning the steam jet
Clean the steam jet once a month.
 To move the central spout into the
maintenance position, touch for
3seconds.
 Pull the stainless steel cover off.
 Remove the dispensing unit toward
the front.
Push the cleaning brush a maximum
of 3/4" (1cm) into the steam jet.
 Clean the steam jet with the cleaning
brush.
 Reinstall the dispensing unit onto the
central spout.
 Reinstall the stainless steel cover.
Cleaning the cup rim sensor
Clean the cup rim sensor every day.
The cup rim sensor is located under the
central spout.
 Press the two catches together (see
arrows).
The cup rim sensor is released.

Miele CoffeeSelect CM 7750 Specifications

General

Current	10 A
Auto power off	Yes
AC input voltage	220–240 V
Annual energy consumption (Switzerland)	67 kWh
Product type	Drip coffee maker
Capacity in cups	- cups
Number of spouts	2
Coffee input type	Coffee beans
Coffee maker type	Fully-auto
Appliance placement	Countertop
Water tank capacity	2.2 L
Coffee beans capacity	210 g
Reservoir for brewed coffee	Cup
Coffee beans container 2 capacity	180 g
Cord length	1.2 m
Control type	Touch
Product color	Black
Mocha making	-
Caffe Crema making	No

Weight and Dimensions

Depth	445 mm
Width	311 mm
Height	420 mm