Cleaning and care
73
Clean the cup rim sensor by hand
with a mild solution of warm water
and liquid dish soap.
Dry the cup rim sensor.
To reinstall:
Press the cup rim sensor from below
into the holder on the central spout.
Cleaning the milk siphon
Clean the milk siphon every day.
Rinse the milk siphon under running
water.
Remove the connecting piece from
the stainless steel tube.
Clean the parts by hand under
running water with a little liquid dish
soap.
If necessary, soak the parts overnight
in water and a little liquid dish soap.
Rinse the parts under running water
afterward.
Dry the parts.
Tip: To give the individual parts an extra
thorough clean, clean them in the
dishwasher from time to time.
Cleaning the milk flask
Clean the milk flask every day.
Unscrew the lid from the milk flask
glass.
Remove the stainless steel tube.
If necessary, you can remove the
connecting piece and seal from the
milk flask lid. Once you have removed
the stainless steel tube, the
connecting piece is easy to push out
from the inside of the lid.
Clean all parts of the milk flask by
hand using hot water and a little
liquid dish soap.
Dry all parts.
Tip: To give the individual parts of the
milk flask an extra thorough clean, clean
them in the dishwasher from time to
time.