Installation and connection
96
Before installing and connecting the
appliance to services, please read
"Plumbing in the appliance".
Switch off the mains electricity sup‐
ply (see "Electrical connection").
Secure AB 45-7 or AB 45-7 L to the
appliance using the four screws sup‐
plied (CM 4x10), as illustrated.
Feed the water inlet hose and the
drain hose through the cut-out in the
base of the housing unit.
Push the appliance into position and
align it. Make sure that the mains
connection cable and water inlet and
drain hoses do not get trapped or
damaged when doing so.
Secure the appliance using the
screws supplied, as illustrated.
Connect the appliance to the water
inlet tap and the drainage outlet.
Connect the appliance to the mains
electricity supply.
Switch on the mains electricity sup‐
ply and the isolator switch (see "Elec‐
trical connection").
Before using for the first time, check
all hose connections for leaks.
Check the appliance for correct func‐
tion in accordance with the operating
instructions.
To Next Page
Loading...
Need help?
General
