Setting the time of day
The display will then change to the screen for setting the
time.
} +
12
:00
} -
Please set the time OK }
^
Set the hours with
+/- and confrim with OK.
Then set and confirm the minutes.
These settings will be saved in memory after the dishwasher
has been through one complete programme.
After you have confirmed the minute entry with
OK, two
messages will appear in the display. The
Insufficient salt
and Rinse aid low messages may also appear to remind you
to fill the salt and rinse aid reservoirs. See relevant sections
for how to do this.
After you have confirmed these messages with
OK, the
display will change to show the main menu.
} Sensor wash
Main menu
r} Quick wash d 40°C
You can now select a programme and start it, or switch the
dishwasher off.
Before using for the first time
18
To Next Page
Loading...
Need help?
General
