Showroom programme
The programme is for display use
only.
The dishwasher is fitted with various
demonstration programmes for
showroom use.
The Demo mode and Demo mode in
continuous loop programmes
demonstrate operation and functions.
–
Demo mode:
This programme is started by
pressing any button. It will run
through once and then has to be
started again.
–
Demo mode in continuous loop:
This programme will begin as soon
as you switch it on and then will play
in a continuous loop until you switch
it off.
–
Demo with sound:
This programme activates the pumps
to demonstrate the sound of the
dishwasher.
–
Demo programme:
The "Before using for the first time"
process is disabled in the display.
–
Drying plus demo:
The door will open automatically.
Switching Demo mode on
^
Select the option you want and
confirm this with
OK.
^
Confirm the following questions with
OK.
^
If necessary, press any button to start
the Demo mode you have selected.
^
To cancel demo mode, press any
button and confirm with it with
OK.
Switching Demo mode off
^
Select
Off and confirm with OK.
^ Confirm
Switch demo programme
off?
with OK
Factory default
If you have altered any settings from
the factory default, you can re-set them
back to the factory default settings.
^ Confirm
Reset factory default
settings?
with OK.
^
Confirm the message
All settings
reset to factory default.
with OK.
To close the Settings ! menu
Touch the Clear button U to come out
of the Settings
! menu and return to the
main menu.
Settings menu !
81
To Next Page
Loading...
Need help?
General
