^
Add rinse aid only until it is visible in
the opening.
The rinse aid reservoir holds approx.
110 ml.
^ Close the flap firmly so that it clicks
into place. Otherwise water can enter
the rinse aid reservoir during a
programme.
^ Wipe up any spilled rinse aid. This
prevents over-foaming occurring
during the next programme.
You can adjust the rinse aid dosage
for best results (see Settings menu J,
Rinse aid).
"Rinse aid low" message
When the Rinse aid low message
appears, the reservoir contains
sufficient rinse aid for2-3programmes
only.
^
Add rinse aid in plenty of time.
If the "2 in 1" or "Combi tab function
has been selected, the "Rinse aid
low" message will not appear (see
"Settings menu J, Detergent type").
^
Confirm with
OK.
The "Rinse aid low" message will go
out.
Before using for the first time
23
To Next Page
Loading...
Need help?
General
