With the aid of the following guide, faults in the performance of the appliance,
some of which may result from incorrect operation can be put right without
contacting the Service Department.
,
Repairs should only be carried out by a suitably qualified and trained
person in strict accordance with current local and national safety regulations.
Unauthorised or incorrect repairs could cause personal injury or damage to the
appliance.
Technical problems
Problem Possible cause Remedy
The dishwasher does
not start.
The door is not properly
closed.
Push the door firmly shut.
The appliance is not
plugged in.
Insert the plug and switch
on at the socket.
The fuse has tripped. Reset or replace the fuse.
(Minimum fuse rating -
see data plate).
The appliance is not
switched on.
Press the On button U, and
select a programme.
A programme has not
been selected.
Select the programme
you want.
The dishwasher stops
during a programme.
The fuse has tripped. Reset or replace the fuse.
After the programme
has started, the
In-operation indicator
light is not visible.
The reflector panel was
not correctly fitted.
Re-fit the reflector panel
correctly (see Installation
diagram).
Problem solving guide
48
To Next Page
Loading...
Need help?
General
