Guide to the machine
11
LEDs in the buttons
The buttons on the control panel have LEDs (Light Emitting Diodes)
that indicate the status of the machine.
Button LED Status
button ON The machine is switched on.
FLASHES The machine is ready for use.
OFF The machine is switched off.
Programme
selection
buttons
,
and
ON The respective programme has been
selected. At the end of the programme
the LED will remain lit until a different
programme is selected.
OFF The programme is not selected or the
programme settings are being selected.
button ON A programme has been selected from
the programme list with this button. At
the end of the programme the LED will
remain lit until a different programme is
selected.
OFF No programme has been selected from
the list with this button or the
programme settings are being selected.
Start/Stop
button
ON Programme running.
FLASHES
GREEN
A programme has been selected but not
yet started.
FLASHES
RED
A fault has occurred (see “Problem
solving guide”).
OFF A programme has finished.
To Next Page
Need help?
General
