Further settings
74
Log book
The entire life cycle of the machine, including consumption data for
water and chemical agents, as well as operating hours and
programme cycles are recorded in the log book.
Miele Service can also use the log to calculate a recommendation for
service intervals.
Open the Further settings menu by switching the machine off with
the button and then switch it on again with the button whilst
keeping the button held in.
Open the menu as follows:
Further settings
Log book
Log book
Consumption: Water
Consumpt.: Clean. agent
- Consumption: Water
Display the total amount of water used in litres (l).
- Consumpt.: Clean. agent
Display the total amount of liquid cleaning agent used in litres (l).
Powder cleaning agent is not shown.
- Consumpt.: Rinsing agent
Display total consumption of neutralising agent or rinsing agent in
litres (l).
- Operating hours
Display the total number of operating hours.
- Programme cycle counter
Total of all completed programme sequences. There is no
breakdown of individual programmes. Cancelled programmes are
not included.
- Service interval
Date of the next service (entered by the Miele Customer Service
Department).
Select an option using the and arrow buttons and confirm your
choice with OK.
Values in the machine log book cannot be altered.
Press the button to exit the menu.
To Next Page
Loading...
Need help?
General
