Settings
67
Display
If necessary, the machine may be placed in standby mode during
breaks in operation.
- An option to display the time of day must be selected for this
purpose.
- Additionally, automatic shutdown must be activated and a wait time
set in “Further settings/Switch off after”.
Once the set wait time has elapsed, the machine is in standby mode.
During standby, the machine remains switched on and the time is
shown on the display. Pressing any button reactivates the machine.
Open the systems menu by switching the machine off with the
button and then with the held in switch it back on with the
button.
Open the menu as follows:
Settings
Time of day
Display
- On
Once the set wait time has elapsed, the machine is permanently in
standby, and the time appears on the display.
- On for 60 seconds
Once the wait time has elapsed, the machine can be reactivated for
use for a period of 60seconds, during which the time appears on
the display. After 60seconds, the machine switches itself off.
- Do not display
Once the set wait time has elapsed, the machine switches off, and
no time appears on the display.
Select an option using the and arrow buttons.
Press OK to save the setting.
To Next Page
Loading...
Need help?
General
