Maintenance
123
Routine checks
Before the start of each working day, the user must carry out a
number of routine checks. A checklist is supplied with the machine
for this purpose.
The following need to be inspected:
- All filters in the wash chamber
- The spray arms in the machine and in any mobile units, modules
and baskets
- The wash chamber and the door seal
- The dispensing systems
- The mobile units, baskets, modules and inserts
- The filters in the load carriers
Cleaning the filters in the wash cabinet
The filters in the floor of the wash chamber prevent coarse soiling
from coming into contact with the circulation system. Filters can
become blocked by soiling. They therefore need to be checked every
day and cleaned as necessary.
Risk of damage due to blocked waterways.
If the filters are not inserted, dirt particles will end up in the
machine water circuit. The dirt particles may block the nozzles and
valves.
Only start a programme if the filters are inserted.
Check that the filters are positioned correctly when you reinsert
them after cleaning.
In the controls, it is possible to set a cleaning interval for the filters in
the wash cabinet, see “Settings/Filter maintenance”.
The cleaning interval is not a substitute for the daily routine check of
the filters in the wash cabinet!
Danger of injury from glass shards, needles, etc. retained in the
filters.
To Next Page
Loading...
Need help?
General
