Further settings
90
Test programme
Various programmes are available for monitoring cleaning
performance in routine testing.
See “Maintenance” for more information on these programmes.
Filter maintenance
HEPA filter
replacement
The air filter in the drying system must be replaced regularly with a
new one. For more information on changing the filter, see
“Maintenance / Changing the HEPA filter”.
Cleaning the
filters in the
wash cabinet
The filters in the wash cabinet must be checked daily and cleaned
regularly, see “Maintenance/Cleaning the filters in the wash cabinet”.
A counter in the controls can be activated to remind you of the
required cleaning at regular intervals.
Activating and
setting the
interval
Open the menu as follows:
button
Further settings
Filter maintenance
Filter combination
Inactive
Active
Filter combination
- Active
The cleaning interval is activated.
The Active selection allows you to reset the counter or set the
cleaning interval.
- Inactive
The cleaning interval is deactivated.
Select an option using the and arrow buttons and confirm your
choice with OK.
To Next Page
Loading...
Need help?
General
