Intended use
9
This washer-disinfector is designed to reprocess laboratory
glassware, utensils and similarly categorised components using
water-based media. These include:
- Vessels such as beakers, flasks, cylinders and test tubes
- Measuring vessels such as measuring cylinders, volumetric flasks
and pipettes
- Dishes such as petri dishes and watch glasses
- Plates such as slides and sequencing plates
- Small items such as lids, magnetic stirring rods, spatulas and
stoppers
- Other items such as boxes, plastic flasks and containers, metal
parts, pipe and hose pieces and funnels
Reprocessing encompasses the cleaning, rinsing, thermal disinfection
(where necessary) and drying of the laboratory glassware, utensils
and components listed above.
Reprocessing is carried out in conjunction with:
- Process chemicals which are tailored to the result of the
reprocessing
- Load carriers which are tailored to the load items
Observe the information issued by the manufacturer of the load
items.
The washer-disinfector is designed for use in laboratories (e.g.
chemical and biological laboratories in universities, research institutes
and industry) as well as laboratory-type applications in the industrial
sector.
Inappropriate use
The washer-disinfector must not be used for any purposes other than
the appropriate use described. This applies in particular to:
- The reprocessing of medical devices that can be reprocessed
- Use in the catering industry
- Domestic use
IMPORTANT
Australia and New Zealand
This machine is not intended to be used to reprocess or disinfect
medical devices or medical equipment.
To Next Page
Loading...
Need help?
General
