Washing
33
Programme start – programme end
Starting a
programme
The programme can be started as soon as the Start/Stopsensor is
flashing on and off.
Touch the Start/Stop sensor.
The door will lock (symbol) and the wash programme will start.
11:02
2:27
White items
Washing and heating
Status
Time left
Useful tip: You can use the pull-down menu to display the selected
temperature, spin speed and any selected Extras.
If a Delay start period has been selected, this will appear in the
bottom-left of the display.
Details
Extras
10:00
White items
9,0/9,9 kg
°C
rpm
90
0:56 h
1300
Help
Overview
01.01 11:00
At the end of the Delay start time or immediately after the programme
has started, the programme duration will appear in the display. The
programme sequence is also shown in the display.
Depending on the selected setting in the Supervisor level or
programme, the machine changes to the Anti-crease phase at the
end of the programme. The door remains locked. However, the door
can be unlocked at any time by touching the Start/Stop sensor.
Removing the
laundry
Pull open the door.
Remove the laundry.
Items left in the drum could discolour other items in the next wash
or become discoloured themselves.
Remove all items from the drum.
Check the door sealing ring for any foreign objects.
Switch the washing machine off with the button.
Useful tip: Leave the detergent dispenser drawer slightly open to
allow it to dry.
To Next Page
Need help?
General
