Changing the programme sequence
36
Changing a programme
Altering the wash
programme
Before selecting a new programme, cancel the current programme
and select a new one.
Cancelling a programme
You can cancel a programme at any time after it has started.
The payment programmes or the disinfection programmes can only
be cancelled by entering a code.
Touch the Start/Stop sensor.
The following will appear in the display:
Programme stopped. Continue by pressing “Start/Stop”.
The following will appear in the display:
11:02
2:27
Programme stopped. Continue by
pressing “Start/Stop”.
Finish
Select Finish.
The suds are not drained so that they can be further used in a
subsequent programme. After the programme has finished, the
display for the programme end mask/programme end screen will
appear. It is possible to change to the main menu with the suds in
the machine or drain the suds by pressing the Start draining selection
field.
The drum door remains closed while water is in the machine.
The door can be opened under the condition Programme end without
water.
Wait until the door unlocks.
Pull open the door.
Remove the laundry.
Switching on the washing machine after a power failure
If the washing machine is switched off with the button during a
wash programme, the programme will be interrupted.
Switch the washing machine back on with the button.
Note the message in the display.
Touch the Start/Stopsensor.
The programme will continue.
To Next Page
Loading...
Need help?
General
