Wi-Fi data protection
75
Data protection and data security
When you activate the networking function and connect your
machine to the Internet, your machine sends the following data to the
Miele Cloud:
- Machine serial number
- Machine model and technical features
- Machine status
- Information about the software status of your machine
Initially, this data cannot be assigned to a specific user and is not
saved permanently. Data cannot be saved permanently or assigned
to a specific user until after you have linked your machine to a user.
Data transmission and processing are governed by Miele’s strict
security standards.
Factory default settings for network configuration
You can reset all of the settings on the communication module or
your integrated Wi-Fi module to the factory default settings. The
network configuration should be reset whenever a machine is being
disposed of or sold, or if a used machine is being put into operation.
This is the only way to ensure that all personal data has been
removed and, in the case of the latter, the previous owner will no
longer be able to access the machine.
Copyright and licences
For the purpose of operating and controlling the communication
module, Miele uses proprietary or third-party software that is not
covered by open source licensing terms. These items of software/
software components are protected by copyright. The copyright
powers of Miele and third parties must be respected.
Furthermore, this communication module contains software
components which are distributed under open source licence
conditions. The open source components contained in the machine
along with the corresponding copyright notices, copies of the
licensing terms valid at the time and any further information can be
accessed locally by IP using a web browser (https://<IP address>/
Licenses). The liability and warranty arrangements for the open
source licences displayed in this location only apply in relation to the
respective rights holders.
To Next Page
Loading...
Need help?
General
